Fast, Reliable Gate Access Control Across Hollywood
Gate access control repair and installation in Hollywood typically runs $280–$1,850 depending on system type, and most service calls are completed same-day when parts are in stock. We’re Summit Gate Repair Service Miami, and James Wilson handles every job personally — from programming new keypads to troubleshooting corroded control boards on 20-year-old Elite operators.
We know Hollywood’s gate landscape intimately. The eastern neighborhoods along the Intracoastal Waterway in 33019–33021 battle salt-air corrosion that destroys control board contacts within three to five years. Western Hollywood’s master-planned communities in 33025–33029 — Emerald Hills, Hollywood Hills, and the developments off Sheridan Street — were built with standardized Elite and Linear gate operators during the late-1990s boom, and those systems are failing in waves now. Whether you’re a homeowner on a 1950s CBS block near Young Circle or a property manager for an HOA off Stirling Road, we stock the parts and brand-specific knowledge to fix your access control without sending you to a second company. Call (844) 722-6701 for a free estimate.
Why Summit Gate Repair Service Miami Is Hollywood’s Preferred Gate Access Control Company
James Wilson has spent eight years as both owner and lead technician, personally servicing gate systems from Miami Beach through Hollywood and into Pembroke Pines. That means when you call, you’re talking to the person who will actually show up with the tools and parts — not a dispatcher routing your job to an unknown subcontractor.
Our Gate Access Control team has earned 730+ verified customer reviews averaging 4.8 stars, and a significant portion comes from repeat Hollywood clients who’ve watched us source discontinued Elite SL600 boards and Linear LDCO800 motors that other companies simply don’t carry. We maintain in-house welding capability and a parts inventory covering nine major brands, so structural repairs and control replacements happen in one visit.
From Hollywood Beach to the western HOA communities, we understand the local failure patterns: salt corrosion east of Federal Highway, aging spec-built systems in the planned developments, and the permit requirements under Broward County’s post-Andrew wind-load codes. That local fluency translates to faster diagnosis and fewer return trips.
Our Gate Access Control Services in Hollywood
Smart Access Systems
Smart access control in Hollywood runs $650–$1,450 for a typical residential installation, including WiFi-enabled operators and app-based entry management. For the townhome clusters and alley-load garage courts near downtown Hollywood — where parking is tight and residents need to grant remote entry to delivery drivers or guests — smart systems eliminate the need for physical key fobs that get lost or cloned. We program LiftMaster myQ and Ghost Controls smartphone integrations that work reliably despite Hollywood’s frequent summer thunderstorms, and we can retrofit smart openers onto existing ornamental iron gates without replacing the entire frame.
Phone Entry Systems
Phone entry system installation in Hollywood typically costs $480–$920 for a residential property, while multi-tenant HOA setups range $1,200–$1,850. The master-planned communities in western Hollywood — built with centralized phone entry at main gates — are now seeing those 1990s-era systems fail as copper wiring degrades and digital cellular networks replace analog landlines. We upgrade these to modern cellular-based phone entry units that don’t depend on buried phone lines, which is critical given how Hollywood’s 60-plus inches of annual rainfall and poorly drained soils corrode underground conduit faster than inland Broward markets.
Video Intercom
Video intercom installation in Hollywood ranges $720–$1,380 for residential, with multi-gate HOA configurations running higher. For the CBS homes in central Hollywood (33020–33023) where owners added ornamental iron gates as aftermarket security upgrades, video intercoms solve a specific problem: you can’t see who’s at a driveway gate from inside a concrete-block house. We mount weatherproof DoorKing and Elite video stations with night vision, wired through conduit where possible or using armored cable where the original gate install left no pathway. Eastern Hollywood properties within blocks of the Intracoastal get marine-grade housing upgrades to resist the salt air that fogs standard camera lenses within two years.
Keypad Entry & Card Reader
Standalone keypad entry repair in Hollywood runs $180–$340; new installations with anti-vandal housings cost $320–$580. Card reader systems — popular with HOAs off Sheridan Street and Stirling Road — range $450–$890 depending on proximity versus long-range RFID. We program multi-code keypads for rental properties near Hollywood Beach, where tenant turnover demands frequent code changes, and we maintain legacy card reader databases so western Hollywood HOAs don’t lose their entire access history when upgrading hardware.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We work on nine automation brands in Hollywood: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our truck stocks legacy Elite SL600 control boards and Linear LDCO800 drive motors — the exact units installed across western Hollywood’s HOA communities during the 1998–2004 building surge. When a community off Sheridan Street calls with a dead operator, we don’t quote a full gate replacement; we diagnose whether a stocked refurbished board or motor solves the problem same-day. That parts advantage is especially valuable in Hollywood, where discontinued model lines outnumber current production units in the field.
Common Gate Access Control Problems We See in Hollywood Homes
- Salt-air corrosion on control boards in eastern Hollywood. Properties within several blocks of the Intracoastal Waterway in 33019–33021 experience galvanic corrosion on ferrous hardware and circuit board contacts that inland markets don’t see. We replace corroded Elite and Linear boards with refurbished units or upgrade to marine-rated enclosures.
- Shorted wiring on central Hollywood’s ornamental iron gates. The 1950s–1970s CBS homes near Young Circle and Hollywood Hills often have aftermarket gates installed without conduit-protected low-voltage runs. Summer thunderstorms flood these exposed connections, causing erratic opener behavior or complete failure until we re-run armored cable.
- Mass simultaneous failures in western HOA communities. The planned developments in 33025–33029 installed identical Elite SL600 and Linear LDCO800 operators across hundreds of units. After 20–25 years, these systems fail in clusters — one community we service had three main-entry operators fail within a single month.
- Permit complications under Broward wind-load codes. Any gate panel replacement in Hollywood must meet post-Hurricane Andrew high-velocity wind zone requirements. We handle the engineering documentation and permit submission, which adds time and cost compared to inland markets but protects your property from liability.
Pricing for Gate Access Control in Hollywood, FL
| Service | Typical Range in Hollywood |
|---|---|
| Keypad entry repair | $180 – $340 |
| Keypad entry (new install) | $320 – $580 |
| Remote control programming / replacement | $95 – $195 |
| Phone entry system (residential) | $480 – $920 |
| Phone entry system (HOA/multi-tenant) | $1,200 – $1,850 |
| Card reader installation | $450 – $890 |
| Video intercom (residential) | $720 – $1,380 |
| Smart access system (full install) | $650 – $1,450 |
| Legacy Elite/Linear board replacement | $380 – $620 (parts + labor) |
What moves the needle on cost: whether your gate has existing conduit for wiring, whether the operator is a current or discontinued model, and whether Broward County permits are required for panel work. HOA communities in western Hollywood often save money when we service multiple gates in one visit — call (844) 722-6701 for an exact quote; estimates are free.
We Also Serve Cities Near Hollywood
We route daily from our Miami base through Hollywood and into neighboring communities — Andover, Miramar, West Park, and West Hollywood — so response times stay short across the corridor. If you’re in western Hollywood near the county line, you’re likely closer to our active route than you think.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Access Control in Hollywood
The Intracoastal Waterway bisects eastern Hollywood, creating persistent salt-laden air that accelerates galvanic corrosion on ferrous hardware and control board contacts. Combined with 60-plus inches of annual rainfall and poor drainage after summer storms, buried electrical conduit and operator housings deteriorate three to five years faster than in areas 20 miles inland like Weston or Southwest Ranches. Call (844) 722-6701 if you’re seeing rust streaks or intermittent gate response — early board replacement prevents full system failure.
Yes, if the replacement involves the gate panel itself or changes the structural mounting. Broward County’s post-Hurricane Andrew wind-load provisions require engineering certification for gate panels in high-velocity wind zones, which includes all of Hollywood. We handle permit submission and engineering documentation as part of our installation service; operator-only replacements on existing compliant gates typically don’t require new permits. Call (844) 722-6701 and we’ll clarify your specific situation — estimates are free.
Yes — we stock refurbished Elite SL600 control boards and drive motors specifically for the western Hollywood communities built during the 1998–2004 boom. We recently replaced a seized Elite SL600 swing-arm operator at the main entrance of a community off Sheridan Street in 33025; the control board had corroded from salt air, but we had a refurbished board on the truck, so the HOA was back to automated entry within four hours — no full replacement needed. Call (844) 722-6701 to check our current inventory for your model.
Smart access with smartphone integration and compact video intercoms work best for Hollywood’s alley-load townhomes, where clearance is tight and residents need to grant remote entry without walking to a front gate. We install LiftMaster myQ and Ghost Controls systems that fit existing ornamental iron frames without widening the opening, and we run wiring through existing pathways to avoid concrete cutting in shared alleyways. Call (844) 722-6701 for a site assessment — estimates are free.
In Hollywood, we recommend annual inspection for inland properties and twice-yearly for properties within a mile of the Intracoastal Waterway, where salt corrosion accelerates wear on contacts and housings. Inspections catch corroding boards before they fail completely, which is especially valuable for western Hollywood HOAs where discontinued Elite and Linear parts require sourcing time. Call (844) 722-6701 to schedule — we offer maintenance agreements for multi-gate communities.
Written by James Wilson, Owner at Summit Gate Repair Service Miami, serving Hollywood since 2016.