Fast, Reliable Gate Parts & Welding Across Plantation
Gate parts and welding repair in Plantation typically runs $180–$650 depending on whether you’re looking at hinge replacement, post realignment, or full custom fabrication. We carry the parts and welding equipment on our trucks, so most Plantation jobs finish in a single visit. If your gate is dragging, sagging, or won’t latch after last night’s storm, call us at (844) 722-6701 and James will walk you through what’s likely wrong before we even head out.
We’ve been driving out to Plantation from our Miami base for eight years, and we know the difference between a quick hinge swap on a newer estate gate and the full teardown that a 1970s-era system in Plantation Acres demands. Our Gate Parts & Welding team stocks heavy-duty hinges, adjustable latch sets, and portable welding gear specifically for the older iron and aluminum gates that dominate this city’s deed-restricted neighborhoods. Whether you’re off Broward Boulevard near the Plantation Historical Museum or back in the winding streets of Jacaranda Lakes, we aim to be on-site within 90 minutes during business hours.
Why Summit Gate Repair Service Miami Is Plantation’s Preferred Gate Parts & Welding Company
Plantation residents have left us 730+ verified reviews averaging 4.8 stars, and we hear the same feedback repeatedly: they called because they were tired of handyman services that showed up without the right hinge size or welding capability. James Wilson handles the job himself — he’s the owner and lead technician, not a dispatcher sending unknown subcontractors. That means when we quote a post replacement or a custom-welded latch for your workshop gate, the person who measures it is the person who fabricates and installs it.
Our response time to Plantation averages under 90 minutes for standard calls, and we prioritize emergency situations — a gate that won’t close after a lightning strike is a security exposure, not a tomorrow problem. We know the local failure patterns: the ficus root heave along NW 5th Street corridors, the lightning surge damage that spikes every June through September, the live oak limbs that come down on slide-gate tracks after afternoon thunderstorms. This isn’t generic gate knowledge — it’s eight years of reading the specific symptoms that Plantation’s climate and housing stock produce.
Our Gate Parts & Welding Services in Plantation
Hinge Replacement
Plantation’s 1970s–1980s master-planned neighborhoods feature unusually high counts of aging gates on original concrete pillars, and those hinges bear the full load of four decades of Florida humidity and salt-laden air. We replace standard and heavy-duty hinges on ornamental aluminum and wrought-iron driveway gates, including offset and J-bolt styles that many newer technicians don’t recognize. A typical hinge replacement in Plantation runs $180–$320, and we carry multiple pin diameters and leaf lengths on the truck so we’re not making a second trip. In Plantation Acres and Jacaranda Lakes, where original build-quality varies, we’ll often find one hinge has been carrying 80% of the load while its partner seized years ago — we replace in matched pairs so your gate tracks true.
Post Replacement
The concrete pillar posts anchoring Plantation’s older swing gates are failing systematically. Ficus root systems — those dense hedges that define so many Plantation subdivisions — heave pillars six inches or more out of plumb, throwing gates out of alignment and overloading hinges. We extract the old post, pour new concrete to proper depth with rebar reinforcement, and realign the gate to factory swing geometry. Post replacement in Plantation typically costs $450–$850 depending on pillar size and whether we’re dealing with embedded electrical conduit for your operator. We did exactly this job last month in Jacaranda Lakes, where decades of root pressure had tilted a FAAC-served pillar so severely the gate was dragging asphalt.
Rail Repair & Track Realignment
Slide-gate tracks in Plantation take abuse from two directions: the humidity that corrodes V-groove wheels and the live oak canopy that drops limbs heavy enough to bend 2-inch steel track. We straighten or replace track sections, re-weld gate arms that have taken impact damage, and realign roller assemblies so your slide gate moves without binding. Track repair with on-site welding runs $280–$550 in Plantation. If the gate arm itself is bent or cracked, we’ll cut and re-fabricate the member rather than ordering a replacement that may not match your 1980s gate profile — that’s the advantage of carrying welding equipment to every job.
Custom Welding & Fabrication
Some Plantation gates need parts that don’t exist anymore. We fabricate custom latch assemblies for workshop gates, extend gate arms to accommodate heaved posts, and build reinforcement gussets for iron gates that have cracked at stress points. Our mobile welding rig handles MIG and stick welding up to ¼-inch steel and aluminum, and we finish with rust-inhibiting primer suited to Broward County’s wet season. Custom welding jobs in Plantation start around $220 for simple repairs and run to $650 for complex fabrication requiring multiple site visits for fitting. For the self-reliant homeowners we meet in Plantation Acres — the ones with detached workshops and equipment gates that see real use — this capability means no waiting for a distant metal shop to interpret your measurements wrong.
Latch & Lock Hardware
We stock magnetic latches, deadbolt-style gate locks, and electric strike hardware for integration with existing access control systems. Plantation’s older gates often have latch pockets worn oval from decades of misalignment, and we’ll weld build-up material and re-machine the catch surface rather than replacing the entire gate frame. Latch and lock replacement ranges from $140–$290 installed.
Gate Rollers & Wheels
V-groove, flat, and cantilever rollers for slide gates — we carry the common sizes and can modify mounting brackets when your 1980s gate uses obsolete bolt patterns. Roller replacement in Plantation runs $160–$280 depending on whether we’re working at ground level or overhead on a cantilever system.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation
We work on Ghost Controls, DoorKing, and Mighty Mule operators regularly in Plantation, and we stock common control boards, limit switches, and safety loop detectors for same-day replacement. But the dominant hardware in this city — especially in those 1970s–1980s build-out neighborhoods — is older FAAC and LiftMaster swing gate equipment that’s now failing en masse. We carry rebuilt and new FAAC 740 series components, LiftMaster LA and CSW series arms, and the Viking swing operators we often recommend as retrofits when the original hydraulic unit isn’t worth rebuilding. Elite access control boards are another frequent repair in Plantation’s HOA entrance gates. Because we stock parts locally and James handles the diagnosis himself, we don’t waste a trip ordering components we should have had on the shelf.
Common Gate Parts & Welding Problems We See in Plantation Homes
- Lightning-fried circuit boards on FAAC and LiftMaster operators. Plantation’s summer thunderstorm cycle — June through September — produces predictable surge damage. We keep replacement control boards and loop detectors on the truck for emergency swaps when your gate stops responding after a storm.
- Live oak limb strikes bending slide-gate tracks and gate arms. The city’s trademark dense tree canopy is beautiful until a 40-pound limb drops on your wrought-iron gate. We straighten tracks and weld arm repairs on-site, usually same day.
- Ficus root heave under concrete pillars in older subdivisions. In Plantation Acres and similar 1970s neighborhoods, invasive root systems lift and tilt gate posts until the gate drags or the hinges tear out. We replace the post, cut roots where accessible, and realign the entire assembly.
- Hinge fatigue on 40-year-old aluminum and iron gates. Original hinges in Plantation’s ranch and split-level neighborhoods were rarely specified for four decades of load cycling. We upgrade to heavy-duty stainless or galvanized hardware with grease fittings for serviceable life.
Pricing for Gate Parts & Welding in Plantation, FL
| Service | Typical Range in Plantation |
|---|---|
| Hinge replacement (pair) | $180 – $320 |
| Latch & lock hardware | $140 – $290 |
| Gate roller/wheel replacement | $160 – $280 |
| Track repair with welding | $280 – $550 |
| Custom welding & fabrication | $220 – $650 |
| Post replacement with concrete | $450 – $850 |
These ranges reflect what we actually charge Plantation customers — they’re not teaser rates that balloon on-site. Cost drivers include: whether your gate uses standard or obsolete hardware, the degree of corrosion we find when we disassemble, and whether concrete work is needed for post stability. We inspect before quoting, and estimates are free. Call (844) 722-6701 for an exact quote on your specific gate.
We Also Serve Cities Near Plantation
Our service radius covers all of central and southern Broward County. We regularly handle gate parts and welding calls in Fort Lauderdale — especially the older estates near the river — plus Broadview Park, Lauderhill, and Lauderdale Lakes. Each city has its own gate vintage and failure patterns, but our stocked parts and mobile welding capability travel with us wherever we’re dispatched.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Plantation
Yes, we replace lightning-damaged FAAC control boards and loop detectors same-day in most cases. We stock FAAC 740 series boards and safety loop detectors on our truck, and James handles the electrical diagnosis himself rather than guessing at components. After eight years in Broward County, we can usually distinguish surge damage from mechanical failure before we leave our shop. Call (844) 722-6701 — we’ll confirm board availability for your specific FAAC model and schedule the repair.
Yes, we carry portable MIG and stick welding equipment and can straighten or re-fabricate bent gate arms at your location. In Jacaranda Lakes specifically, we’ve repaired multiple gates where live oak limbs have struck slide-gate arms or bent track sections — the dense canopy there makes this a predictable issue. We also inspect the hinge and post alignment while we’re on-site, since impact damage often transfers stress to those connections. Most welding repairs in Jacaranda Lakes finish in under two hours. Call (844) 722-6701 for a free estimate.
Almost certainly yes, if you’re in an older Plantation subdivision with mature ficus hedges or live oaks near the gate line. Ficus roots are invasive and powerful enough to heave concrete pillars six inches or more out of plumb, which throws the gate geometry off and causes dragging. We see this constantly in Plantation Acres and similar 1970s–1980s neighborhoods. The fix is post replacement with proper depth and rebar, root barrier where practical, and gate realignment — not just shimming the hinges, which masks the problem until the pillar fails completely. Post replacement with realignment typically runs $450–$850 in Plantation.
Yes, we fabricate custom latch and strike hardware for non-standard gates, including heavy workshop gates that see daily use. We’ll measure your gate and post geometry on-site, weld the latch body from steel or aluminum stock to match your existing gate material, and install with adjustable strike clearance so it engages cleanly even if your post shifts slightly in Florida’s wet season. Custom latch fabrication and installation in Plantation starts around $220. Call (844) 722-6701 to discuss your specific gate and schedule a measurement.
We service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Plantation specifically, we see the highest concentration of aging FAAC and LiftMaster swing operators from the 1970s–1980s build-out, and we stock parts and retrofit options for those systems. We also install and repair Ghost Controls and Mighty Mule equipment for homeowners upgrading to modern residential operators. James handles the brand-specific programming and limit adjustments himself. Call (844) 722-6701 with your operator model number and we’ll confirm parts availability before we dispatch.
Ready to get your gate working properly? Call (844) 722-6701 now for a free estimate. James Wilson will answer your questions, diagnose the likely problem based on your description, and schedule a same-day or next-day visit to your Plantation property. We carry the parts, we weld on-site, and we don’t leave until your gate opens and closes the way it should.
Written by James Wilson, Owner at Summit Gate Repair Service Miami, serving Plantation and Broward County since 2016.